LightMake L4 3D printer features four independent heads for simultaneous or multi-color printing (Crowdfunding)
📌 概要
LightMake推出众筹桌面3D打印机L4，配备四个独立打印头，支持直线电机驱动。可实现四模型同时批量打印、多色打印几乎免清除废料，以及单次最多混合四种材料打印，定位高吞吐多色多材料生产。
⚡ 关键要点
- ▸四个独立控制打印头，可同时打印四个相同模型或批量生产
- ▸采用直线电机取代传统皮带传动，提升精度与速度
- ▸多色打印换色几乎无需清除废料，单次打印最多支持四种材料
The LightMake L4 is a desktop 3D printer with four independent printing heads for high-throughput multi-color, multi-material, and batch production. It uses four independently controlled printheads and linear-motor motion instead of conventional belts, allowing users to print four identical models simultaneously, produce complex multi-color parts with minimal purge waste, or combine up to four materials in a single print. Typically, multi-color FDM 3D printers like the Bambu Lab X1 or Geeetech A20M use a single-nozzle purge material during every color change, which leads to a lot of material waste and longer print times. The LightMake L4 takes a different approach by keeping four filaments loaded and heated in four completely separate extruders. According to the company, this allows for one-second toolhead changes and near-zero purge waste. The linear motor system also promises ±1µm motion precision and speeds of up to 500 mm/s. LightMake L4 and L1 specifications: Printing technology – [...]
The post LightMake L4 3D printer features four independent heads for simultaneous or multi-color printing (Crowdfunding) appeared first on CNX Software - Embedded Systems News.